Cover Mode - Kyocera TASKalfa 420i Operation Manual

Cover Mode

Add a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thick
paper fed from the different paper source than the regular one. The following two options are available. Paper
for the cover is supplied from the multi purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover Paper on page 8-10.
Type of Cover
Front Cover
Front and Back
Covers
The procedure for using Cover mode copying is explained below.
Ready to copy.
Cover
Print cover pages on the different type of
paper, using a different paper source.
Select either [Front Cover] or
[Front and Back Covers].
Place original.
*Set paper source for cover in System Menu.
Original : ---
Off
:
Zoom
100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
First page of the originals is copied on a different
paper.
First page and last page of the originals are
copied on different paper.
Copies
Front Cover Front and Back
Covers
Cancel OK
08/08/2009 10:10
Description
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Cover].
4
Press [Front Cover] or [Front and Back Covers].
5
Press [OK].
6
Press the Start key. Copying begins.
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
Copying Functions
4
4-21