Kyocera TASKalfa 420i Operation Manual page 260

Default Setting (System Menu)
2
Press [Copy] and [Change] of Preset Limit.
3
Press [+] or [–] or use the numeric keys to enter the limit for the number of copies.
4
Press [OK].
Quick Setup Registration
Select the copying functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated
to typical functions but can be changed as necessary. Six items from the following options are available.
Paper Selection, Zoom, Staple/Punch, Density, Duplex, Combine, Collate/Offset, Original Image,
Original Size, Original Orientation, Continuous Scan
NOTE:
Refer to Quick Setup Screen on page 3-43 for the Quick Setup steps.
Use the procedure below to register the Quick Setup functions.
1
Press the System Menu key.
2
Press [Copy] and [Next] of Quick Setup Registration.
3
Press [Change] of the function to be registered in Quick Setup.
4
Select a key (1-6) allocated on the Quick Setup Registration screen. Press [Off] to delete a key from the
Quick Setup.
5
Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes].
8-28 OPERATION GUIDE