Original Image; Continuous Scan; File Name Entry; Job Finish Notice - Kyocera Triumph-Adler P-3527w Operation Manual

Sending Faxes > Original Image

Original Image

Select original image type for best results.
Item
Text+Photo
Photo
Text
Light Text/Fine Line
Text (for OCR)

Continuous Scan

Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
(Value: [Off] / [On])

File Name Entry

Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters)
To add date and time, select [Date and Time]. To add job number, select [No.]. To add both, select [Job No. & Date and
Time] or [Date and Time & Job No.].

Job Finish Notice

Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
NOTE
PC should be configured in advance so that E-mail can be used.
Machine's Operation Guide
E-mail can be sent to a single destination.
It is possible to attach an image to the e-mail notice.
Job Finish Notice Setting (page 8-4)
Best for mixed text and photo documents.
Best for photos taken with a camera.
Best for documents that are mostly text.
Clearly reproduces faint characters written in pencil, etc., and thin lines on map originals or
diagrams.
Scanning produces an image that is suitable for OCR.
, and select [Next].
3-17
Description