Original Size Selection - Kyocera TASKalfa 420i Operation Manual

Sending Functions

Original Size Selection

Select the size of originals that will serve as the basis for scanning. Be sure to select the original size when using
originals of nonstandard sizes.
Choose the original size from the following groups of original size.
Item
Standard
Sizes 1
Standard
Sizes 2
Others
Size Entry
* Regarding the setting method of Custom Original Size (Custom 1 to 4), refer to Custom
Original Size Setup on page 8-4.
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-11.
Use the procedure below to select the original size when sending scanned images.
5-2
Detail
Select from automatic
detection and standard
sizes.
Select from standard
sizes except Standard
Sizes 1 .
Select from Hagaki and
Custom Original Size *.
Enter the size that is not
indicated in Standard
Sizes 1 and 2**.
Size
Inch models: Auto, Ledger, Legal, Letter, Letter-
R, Statement, Statement-R, 8.5×13.5", Oficio II-
R, 11×15"
Metric models: Auto, A3, B4, A4, A4-R, B5, B5-
R, A5, A5-R, B6, B6-R, A6-R, Folio
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5,
A5-R, B6, B6-R, A6-R, Folio, 8K, 16 K, 16K-R
Metric models: Ledger, Legal, Letter, Letter-R,
Statement, Statement-R, 8.5×13.5", Oficio II-R,
11×15", 8K, 16K, 16K-R
Hagaki, Oufuku Hagaki, Custom 1 to 4
Inch models
Horizontal: 2 to 17" (in 0.01" increments),
Vertical: 2 to 11.69" (in 0.01" increments)
Metric models
Horizontal: 50 to 432 mm (in 1 mm increments),
Vertical: 50 to 297 mm (in 1 mm increments)
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Original Size].
OPERATION GUIDE