Kyocera TASKalfa 420i Operation Manual page 332

Troubleshooting
Error Message
Finisher tray is full of
paper.
Hard Disk error.
Job is canceled.
Press [End].
##
Incorrect box
password.
Incorrect Login User
Name or Password.
Job Accounting
restriction exceeded.
Job separator is full
of paper.
KPDL error.
Machine failure.
Maximum number of
scanned pages.
Memory is full.
10-8
Checkpoints
Is the acceptable storage
capacity exceeded for the
document finisher tray?
–
–
–
Is the acceptable printing
count restricted by Job
Accounting exceeded?
Is the maximum capacity of
the job separator exceeded?
–
–
Is the acceptable scanning
count exceeded?
–
Corrective Actions
Remove paper from the document
finisher tray.
If printing can be restarted, the touch
panel display will prompt you to press
[Continue]. Then press [Continue].
An error has occurred on the hard
disk. The possible error codes and
their descriptions are as follows.
01: Initialization error. Initialize the
hard disk.
04: Insufficient space on the hard
disk to complete this operation. Move
or delete data stored on the hard disk
to increase available space.
Enter the correct password.
Enter correct login user name or
password.
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Press [End].
Take some paper out of the job
separator. Printing then resumes.
PostScript error has occurred.
The job is canceled. Press [End].
Internal error has occurred. Make a
note of the error code displayed on
the touch panel. Turn off the
machine, unplug the power cord, and
contact your Service Representative.
Only one copy of the scanned pages
is available. Press [Continue] to print,
send or store the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
Reference
Page
—
—
—
—
—
—
—
—
—
—
OPERATION GUIDE