Error Handling - Kyocera TASKalfa 420i Operation Manual

Default Setting (System Menu)

Error Handling

Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
Item
1-sided
Display Error
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
Processing
Ignore
Display Error
No Staple Error
Select what to do when staples run out during printing.
Item
Ignore
Display Error
NOTE:
The messages are displayed when the optionalbuilt-in finisher, document finisher, or 3,000 sheet
document finisher is installed.
Stapling Limit Error
Select what to do when stapling capacity is exceeded during printing.
Item
Ignore
Display Error
NOTE:
The messages are displayed when the optionalbuilt-in finisher, document finisher, or 3,000 sheet
document finisher is installed.
8-12
Printed in 1-sided
Error message to cancel printing is displayed.
The setting is ignored and the job is printed.
Error message to cancel printing is displayed.
Printing continues without stapling.
Error message to cancel printing is displayed.
Printing continues without stapling.
Error message to cancel printing is displayed
Description
Description
Description
Description
OPERATION GUIDE