Kyocera TASKalfa 420i Operation Manual page 240

Default Setting (System Menu)
Paper Weight Light
Envelope
High Quality
Custom 1-8
Heavy 1, Heavy 2, Heavy 3, or Extra Heavy
* When
cassettes.
For Custom 1-8, settings for duplex printing and media type name can be changed.
Item
Duplex Prohibit
Permit
Name
Use the procedure below to set the paper weight.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Media Type Setting.
3
Press [Next] for the media type whose weight you want to change.
4
Press [Change] of Paper Weight.
5
Select the weight and press [OK].
6
Press [Close].
The previous screen reappears.
7
To change the duplex printing settings for Custom 1 (-8), press [Next] of Custom 1(-8) and then [Change]
of Duplex. Select [Prohibit] or [Permit] and press [OK].
The previous screen reappears.
8
Press [Close].
9
To change the name for Custom 1(-8), press [Next] of Custom 1(-8) and then [Change] of Name. Enter the
name and press [OK].
NOTE:
Refer to the Character Entry Method on Appendix-10<blue> for details on entering characters.
8-8
Normal 1 Normal 2
N N
Y
Y Y
(default)
Y
Y Y
(default)
Duplex printing not allowed.
Duplex printing allowed.
Change names for Custom 1-8. Names should be not more
than 15 characters. Selecting media type at multi purpose
tray, the name after change will be displayed.
Normal 3 Heavy 1
N N
Y
Y
is selected, the media type cannot be selected for the
Description
Heavy 2 Heavy 3
Y
Y
(default)
Y N
Y Y
* *
OPERATION GUIDE
Extra
Heavy
Y N
N N
Y Y
* *