Centering - Kyocera TASKalfa 420i Operation Manual

Sending Functions

Centering

When you have scanned the original after specifying the original size and sending size, depending on these
sizes, a margin is created at the bottom, left, or right side of paper. By using the centering, the image is placed
with a margin equally created at each of the page Top/Bottom and Left/Right.
Use the procedure below to center then image when sending a scanned image.
5-6
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Centering].
4
Press [On]. Centering is performed.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE