Protocol Detail - Kyocera TASKalfa 420i Operation Manual

Default Setting (System Menu)
4
Press [Change] of DHCP.
5
Press [On] or [Off] of DHCP. When selecting [On], IP Address (Stateful) appears.
6
Press [OK].
7
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.

Protocol Detail

The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item
NetBEUI
LPD
SMTP
(E-mail TX)
POP3
(E-mail RX)
FTP Client
(Transmission)
FTP Server
(Reception)
SMB Client
(Transmission)
i-FAX
LDAP
SNMP
SNMPv3
HTTP
8-66
Description
Selects whether or not to receive
documents using NetBEUI.
Select whether or not to receive
documents using LPD as the network
protocol.
Select whether or not to send e-mail
using SMTP.
Select whether or not to receive e-mail
using POP3.
Select whether or not to send
documents using FTP. When selecting
[On], set the FTP Port Number. Use
the FTP default port 21.
Select whether or not to receive
documents using FTP.
Select whether or not to send
documents using SMB. When
selecting [On], set the SMB default
Port Number. Use the SMB default port
139. For Windows Vista, use 445.
Select whether or not to use i-FAX.
Select whether or not to use LDAP.
Select whether or not to communicate
using SNMP.
Select whether or not to communicate
using SNMPv3.
Select whether or not to communicate
using HTTP.
Default Restarting the
Setting System*
On
On
Off
Off
On
Port:21
On
On
Port:139
On
Off
On
Off
On
OPERATION GUIDE
Y
Y
N
N
Y
Y
N
N
N
Y
Y
Y