Kyocera TASKalfa 420i Operation Manual page 268

Default Setting (System Menu)
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Item
1-sided
2-sided Bind
ShortEdge
2-sided Bind
LongEdge
Use the procedure below to select a duplex setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided], [2-sided Bind LongEdge], or [2-sided Bind ShortEdge].
4
Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
3
Press [+],[–] or the numeric keys to set the default number of copies.
4
Press [OK].
8-36
Description
No duplex mode
Shorter edge bound
Longer edge bound
Finish
OPERATION GUIDE