Kyocera TASKalfa 420i Operation Manual page 164

Sending Functions
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 5-2), Sending Size, and Zoom (page 5-5) are related to each other. Refer to the following
table.
Original Size and the size you
Original Size
Sending Size
Zoom
NOTE:
When you select Sending Size that is different from Original Size, and select the Zoom [100%], you
can send the image as the actual size (No Zoom).
Use the procedure below to select the size for transmission when sending scanned images.
Ready to send.
Place original.
Sending Size
Standard
Sizes 1
Standard
Place original.
Sizes 2
Others
Original : ---
Zoom : 100%
---
Paper :
Preview
Add Shortcut
Status
5-4
wish to send as are
Destination
Same as Ledger Letter
Original Size
Legal Statement 11x15"
8.5x13.5" OficioII
Cancel OK
08/08/2009
the same
Specify as
necessary
Select [Same as
Original]
Select [100%]
(or [Auto])
1
Press the Send Key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Sending Size].
4
Press [Standard Sizes 1], [Standard Sizes 2], or
[Others] to select the sending size.
5
Press [OK].
10:10
6
Specify the destination, and press the Start key to
start sending.
different
Specify as
necessary
Select the
required size
Select [Auto]
OPERATION GUIDE