Interrupt Copy - Kyocera TASKalfa 420i Operation Manual

Basic Operation

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE:
You can change the delay until interrupt copying is cancelled. Change the delay as required. For more
information, refer to Interrupt Clear Timer on page 8-50.
Ready for interrupt copy.
Copy Image
Place original.
Auto
Paper
Original : ---
Selection
Zoom : 100%
2-sided
---
Paper :
>>2-sided
Preview Duplex
Quick Setup Org./Paper/ Image Quality
Finishing
Status
3-16
Copies
Shortcut 1
Shortcut 2
Shortcut 3
100% Normal 0
Shortcut 4
Zoom Density
Shortcut 5
2 in 1 Off
Shortcut 6
Combine Staple/Punch
Layout/Edit Advanced
Setup
08/08/2009
1
Press the Interrupt key.
1
Ready for interrupt copy. is displayed.
The current print job is temporarily interrupted.
10:10
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
OPERATION GUIDE