Connecting Usb Cable; Connecting The Power Cable - Kyocera TASKalfa 420i Operation Manual

Preparation before Use

Connecting USB Cable

Follow the steps below to connect a USB cable to the machine.

Connecting the Power Cable

Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes with the machine.
2-6
Check that
the indicators
are off.
D P
A 2
B 1
O P
T 1
1
When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator and the memory indicator are off.
After this, turn off the main power switch.
2
Connect the USB cable to the appropriate interface
located on the right side of the body.
3
Connect the other end of the cable to the PC.
OPERATION GUIDE