Continuous Scan; Auto Image Rotation - Kyocera TASKalfa 6003i Operation Manual

Hide thumbs Also See for TASKalfa 6003i:

Table of Contents

Using Various Functions > Functions

Continuous Scan

Scans a large number of originals in separate batches and then produce as one job.

Originals will be scanned continuously until you select [Finish Scan].

Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on

the screen during scanning.

(Value: [Off] / [On] / [Job Build])

When [Job Build] is selected when copying or printing, the binding orientation for finished documents can be selected

from [Binding Left], [Binding Right] or [Binding Top].

The following functions can be selected during scanning.

Next Copy: On Back

Next Copy: On Front

Sheet Insertion

Automatically rotates the image 90 degrees when the sizes of the original and the loaded paper matches but the

orientations are different.

(Value: [Off] / [On])

• You can select whether to rotate the image automatically in the default settings.

Auto Image Rotation (Copy) (page 8-20)

• When you have enabled this function, you can select how the images are rotated.

Auto Image Rotation Action (page 8-35)

In duplex copying, prints on the back side if the next page is to be printed on the front

side. Select [Next Copy: On Back] to use this function.

In duplex copying, prints on the front side if the next page is to be printed on the back

side. Select [Next Copy: On Front] to use this function.

Inserts a blank paper in the next page. Select [Sheet Insertion] to use this function.

Show Quick Links

Table of Contents

Taskalfa 5003i