Selecting How To Copy Originals - Kyocera TASKalfa 420i Operation Manual

Selecting How to Copy Originals

Select whether you wish to create individual copies on different size paper matching the original sizes or to
produce all copies on the same size paper.
NOTE:
This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Mixed Size Copies
Same Size Copies
Use the procedure below to copy mixed size originals.
Ready to copy.
Mixed Size Originals
Original Width
Off
Mixed Size
Place original.
Copies
Same Size
Copies
Top Page Direction
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Option
Originals are detected individually for size and
copied to the same size paper as originals.
Originals are all copied to the same size paper.
Copies
Same Width Different
Width
Long Edge Short Edge
Left Left
Cancel OK
08/08/2009 10:10
Description
1
Press the Copy key.
2
Place originals on the document processor.
IMPORTANT: When placing originals of different
widths, be sure to flush them against the document
width guide toward the back of the machine.
3
Press [Org./Paper/Finishing] and then [Mixed Size
Originals].
4
Select [Mixed Size Copies] or [Same Size Copies]
as finish size.
5
Select the combination of originals from [Same
Width] and [Different Width].
When [Same Size Copies] is selected, select [Long
Edge Left] or [Short Edge Left] as the first original
orientation.
6
Press [OK].
7
Press the Start key to start copying.
Copying Functions
4
4-9