1-Sided/2-Sided Selection - Kyocera TASKalfa 420i Operation Manual

Sending Functions

1-sided/2-sided Selection

Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
1-sided Sheet Original
2-sided Sheet Original
Open Book Original such
as magazine and book
*
Use the procedure below to select the original type and binding direction when sending scanned originals.
Ready to send.
Place original.
2-sided/Book Original
1-sided
2-sided
Place original.
Book
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
5-10
Original
Only when the optional document processor is used.
Destination
Left Right
Top Edge Top
Original
Orientation
Cancel OK
08/08/2009
Type
1-sided
2-sided*
Book
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then [2-
sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
When selecting [2-sided], select the binding
direction and press [Original Orientation] to select
the direction in which the original is set on the
platen.
When selecting [Book], select the binding direction.
6
Press [OK].
10:10
7
Specify the destination, and press the Start key to
start sending.
Binding
—
Binding Left/Right,
Binding Top
Binding Left,
Binding Right
OPERATION GUIDE