Kyocera TASKalfa 420i Operation Manual page 375

Default Counter Limit
When you add a new account, you can change the default restrictions on the number of sheets used.
You can set any number from 1 to 9,999,999 in 1-sheet increments.
The items that can be set differ depending on whether [Split] or [Total] is selected for Managing the Copier/
Printer Counts on page 11-18.
Available Settings
 [Split] selected for Copier/Printer Count
Item
Copy Restriction (Total)
Print Restriction (Total)
Scan Restriction (Others)
FAX TX Restriction
 [Total] selected for Copier/Printer Count
Item
Print Restriction (Total)
Scan Restriction (Others)
FAX TX Restriction
Use the procedure below to specify the counter limits.
OPERATION GUIDE
Sets the default restriction on the number of sheets used for
copying.
Sets the default restriction on the total number of sheets used
for printing.
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
Sets the default restriction on the total number of sheets used
for copying and printing.
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter a login user
name and password, and press [Login]. For this,
you need to login with administrator privileges.
Refer to Adding a User on page 11-5 for the default
login user name and password.
Detail
Detail
Management
11
11-21