Kyocera TASKalfa 420i Operation Manual page 306

Default Setting (System Menu)
Limitations:
- Scanning speed will be limited to the speed of scanning 600 dpi image. (Printing speed will not
be limited.)
- FAX transmission will be limited to the memory transmission.
Note:
- The Printed Document Guard Kit should not fully prevents a leak of information. We do not
guarantee any loss incurred while using this feature or when malfunction occurred with this
feature.
- The guard pattern printed on the colored paper or paper that is decorated with special design
may not be detected.
- We do not guarantee the integrity of the detection. If the malfunction occurs, contact your service
representative.
Use the procedure below to specify the Document Guard setting.
1
Press the System Menu key.
2
Press [System] and then [Next] of Optional Function.
NOTE:
If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select [Document Guard] from the list and then [Activate].
4
Enter the license key and press [Official]. To use the function as a trial, press [Trial] without entering the
license key.
NOTE:
For details on how to enter the license key, consult your dealer or service representative.
8-74 OPERATION GUIDE