Kyocera TASKalfa 420i Operation Manual page 199

Form Overlay from Custom Boxes
This function allows you to retrieve images (image files), overlay them into documents stored in custom boxes
and then print the results.
Use the procedure below.
Box:
File Name Date and Time
0001 0404200710574501 10/10/2008 09:40
0002 0404200710574511 10/10/2008 09:50
0003 0404200710574521 10/10/2008 10:00
Print Send Join
Status
Ready to store in Box.
File Name:
Form Overlay
Density
Off
Select
Place original.
Stored Form
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Size
21 MB Search(Name)
21 MB
21 MB
1/1
Detail
Preview
Move/Copy Delete Store File
Close
08/08/2009 10:10
Copies
(10 - 100)
100
%
Off
Select
Form
Cancel OK
08/08/2009 10:10
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to overlay the image into and
print, and then press [Open].
NOTE:
If a custom box is protected by a password,
enter the correct password.
3
Select the document you wish to print by checking
the checkbox.
The document is marked with a checkmark.
NOTE:
To deselect, press the checkbox again and
remove the checkmark.
4
Press [Print].
5
Press [Functions], [Form Overlay], [Select Stored
Form], and then [Select Form].
NOTE:
You can change the form density setting
through 10 levels from 10% to 100%. Press the [+] or
[-] buttons in Density.
6
In Form Overlay - Select Form, select the image file
to be overlaid onto the document from the
displayed document boxes.
You can only select one image file.
7
Press [OK].
8
Press [OK] again to return to the Functions screen.
9
Press the Start key. Printing begins.
Document Box
6
6-7