Background Density Adjustment - Kyocera TASKalfa 420i Operation Manual

Sending Functions

Background Density Adjustment

Lightens the background of the colored original when it is too dark.
NOTE:
You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-21).
Use the procedure below to set the background density when sending scanned images.
Ready to send.
Place original.
Background Density Adj.
Off
On
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
5-20
Destination
Background
Lighter Darker
1 2 3 4 5
Cancel OK
08/08/2009
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Background
Density Adj.].
4
Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
5
Press [OK].
10:10
6
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE