Auto Image Rotation; Negative Image - Kyocera TASKalfa 420i Operation Manual

Copying Functions

Auto Image Rotation

Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE:
To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-21.
The procedure for making copies using Auto Image Rotation is explained below.

Negative Image

Inverts black and white portions of the image for printing.
NOTE:
This function is only available for black and white copy mode.
Use the procedure below to make negative image copies.
4-32
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Auto Image
Rotation].
4
Press [On] to select Auto Image Rotation.
5
Press [OK].
6
Press the Start key to start copying.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Negative
Image].
4
Press [On] to select Negative Image.
5
Press [OK].
6
Press the Start key to start copying.
OPERATION GUIDE