Appletalk Setup - Kyocera TASKalfa 420i Operation Manual

Preparation before Use
Auto-IP Settings
Select whether or not to use Auto-IP. The default setting is On.
Use the procedure below.

AppleTalk Setup

Select the Apple Talk network connection. The default setting is On.
Use the procedure below.
2-14
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Bonjour].
7
Press [On] or [Off] of Bonjour and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-63.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Auto-IP].
7
Press [On] or [Off] of Auto-IP and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-63.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of AppleTalk.
3
Press [On] or [Off].
OPERATION GUIDE