Kyocera TASKalfa 420i Operation Manual page 84

Basic Operation
Book to One-sided
1
Original
Book to Two-sided
1 2 3 4
2 1 4 3
Original
The procedure for using two-sided/duplex copying is explained below.
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Place original.
>>2-sided
2-sided
>>1-sided
2-sided
>>2-sided
Original : ---
Book
Zoom :
100%
>>1-sided
Paper : ---
Book
Preview
>>2-sided
Add Shortcut
Status
3-12
2
1 2
Copy
Facing pages
Facing pages
-> Facing pages
-> Two-sided
3
1 2
1
3
2 1
1
Copy
Copies
Finishing
Top Edge Top
Binding Binding
Original
Left/Right Top
Orientation
Cancel OK
08/08/2009
Produces a 1-sided copy of a 2-sided or open book
original.
The following binding options are available.
• Binding Left: Originals with facing pages are
copied from left to right.
• Binding Right: Originals with facing pages are
copied from right to left.
NOTE:
The following sizes of originals and paper are
supported in Two-sided to One-sided and Book to One-
sided. Original: Ledger, Letter-R, A3, B4, A4-R, B5-R,
A5-R and 8K. Paper: Letter, A4, B5 and 16K. You may
change paper size and reduce or enlarge copy to
match that size.
Produces two-sided copies from an open book original
with facing pages.
NOTE:
The following sizes of originals and paper are
supported in Book to Two-sided mode. Original:
Ledger, Letter-R, A3, B4, A4-R, B5-R, A5-R and 8K.
Paper: Letter, A4 and B5.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Duplex].
4
Select the desired Duplex option.
5
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
If you choose [Book>>2-sided], press [Book>>2-
sided] or [Book>> Book] of Finishing to select the
setting for duplex.
10:10
OPERATION GUIDE