Default Setting (System Menu)
Use the procedure below to set the automatic error clear delay.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
3
Press [+] or [–] to enter the time until printing restarts.
You cannot use the numeric keys to enter this value.
4
Press [OK].
Interrupt Clear Timer
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
3
Press [+] or [-] to enter the time for the interrupt clear timer.
4
Press [OK].
8-50
] and then [Change] of Error Clear Timer.
] and then [Change] of Interrupt Clear Timer.
OPERATION GUIDE