Kyocera TASKalfa 420i Operation Manual page 136

Copying Functions
Types of Page Boundary Lines
The following types of the boundary lines are available.
None
The procedure for using Combine mode copying is explained below.
Ready to copy.
Combine
Off
2 in 1
Place original.
4 in 1
Original : ---
Zoom :
100%
Paper : ---
Preview
Add Shortcut
Status
4-14
Solid
Copies
Layout
Left then
Right then
Down
Down
None
Border Line
Top Edge Top
Down then
Down then
Right Left
Original
Orientation
Cancel OK
08/08/2009
Dotted
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Combine].
4
Press [2 in 1] or [4 in 1], and choose the page layout
of Layout.
5
Press [Border Line] to choose the type of the lines
to indicate page boundaries. Press [OK].
6
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
7
Press [OK].
10:10
8
Press the Start key. Copying begins.
If the original is placed on the platen, replace the
original and press the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
Borders
(Cropmark)
OPERATION GUIDE