Kyocera TASKalfa 420i Operation Manual page 100

Basic Operation
Ready to send.
Place original.
Destination
ABCD abcd@efg.com
TUVW 10.200.188.120
Group1 Group1
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Original/Sending
Status
3-28
Destination
Detail
Address
Book
To:
E-mail
Auto
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005 No.
DDD EEE i-FAX
Addr Entry
0009 0010 1/100
WSD Scan
III JJJ
Color/ Advanced
Data Format Image Quality Setup
08/08/2009
8
Check the destination list.
Select a destination and press [Detail/Edit] to check
and edit it. Edit it, if necessary, referring to steps 3
to 5.
Select a destination and press [Delete] to remove
the destination from the list.
NOTE:
When On is selected in FTP Encrypted TX
(page 5-31), keys appear for selecting the encryption
10:10
method for the FTP transmission destination. Select
Auto, DES, 3DES or AES as the encryption method.
When selecting [On] for Entry Check for New
Destination (page 8-31), the confirmation screen
appears. Enter the same host name and path again,
and press [OK].
When selecting [On] for Destination Check before Send
(page 8-30), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-29.
OPERATION GUIDE