Ftp Encrypted Tx; Color Type - Kyocera TASKalfa 420i Operation Manual

FTP Encrypted TX

This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.

Color Type

This sets the color type when you send color documents. The table below shows the available settings.
Item
RGB
sRGB
Selecting RGB displays the color profile values set on the machine.
Send - Color Type
Specify the color type to send color images.
RGB
Profile:
RGB FINE 1
sRGB
Status
OPERATION GUIDE
–
Match the color reproduction space between sRGB compatible systems.
Cancel OK
08/08/2009 10:10
1
Press the Send Key.
2
Place the originals in the document processor or on
the platen.
3
Press [Advanced Setup], [
Encrypted TX].
4
Press [On].
5
Press [OK].
NOTE:
Click Advanced -> Secure Protocols in the
COMMAND CENTER. Be sure that SSL of Secure
Protocol Settings is On and one or more effective
encryption are selected in Clientside Settings. For
details, refer to the KYOCERA COMMAND CENTER
Operation Guide.
Detail
1
Press System Menu key.
2
Press [Send] and [Change] of Color Type.
3
Select [RGB] or [sRGB].
4
Press [OK].
Sending Functions
], and then [FTP
5-31
5