Kyocera TASKalfa 420i Operation Manual page 254

Default Setting (System Menu)
3
Select the default for [Off] or [On].
4
Press [OK].
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
Item
Off
On
NOTE:
Refer to page 4-13 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
4
Press [OK].
PDF/TIFF/JPEG Image
Select the default PDF/TIFF/JPEG file quality. Five options are available from 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.).
NOTE:
Higher quality will make the stored files larger.
Refer to page 5-12 for file formats.
Use the procedure below to select the default file quality setting.
1
Press the System Menu key.
2
Press [Common Settings], [
TIFF/JPEG Image.
3
Select the default image quality from [1] (Low Quality) to [5] (High Quality).
4
Press [OK].
8-22
No EcoPrint performed.
EcoPrint performed.
], [Next] of Function Defaults, [
] and [Next] of Function Defaults. Press [
Description
] twice, and then [Change] of EcoPrint.
] twice and then [Change] of PDF/
OPERATION GUIDE