Error Codes - Datalogic MAGELLAN 1500i Quick Reference Manual

Error Codes

If an error is detected, the scanner will sound a long low tone (for three
seconds) and flash its LED, indicating a failure. When this occurs, press
the Scanner button to hear the error code. If it is configured to do so,
the scanner will sound a series of beeps corresponding to the error code
and/or flash its LED simultaneous to the beeps. The table below
describes what these codes mean and what action should be taken for
each.
NUMBER
OF LED
FLASHES/
BEEPS
1
2
6
10
11
13
16
MAGELLAN™ 1500I
ERROR
Configuration
Host Interface
Main PCB
Button Error
USB Device
FPGA ID
CORRECTIVE ACTION
Contact Helpdesk for assis-
tance