Length Control; Msi/Plessey Length 1, Length 2 Programming Instructions - Datalogic Magellan 800i Reference Manual

MSI/Plessey — continued

Length Control

Fixed Length Decoding—
bar code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
decode a bar code if the label length falls in the range of the configurable minimum and maxi-
mum length.
START / END
020000(CR)
Fixed Length Decoding

MSI/Plessey Length 1, Length 2 Programming Instructions

See
page 156
START / END
00CB(CR)
DEFAULT SETTING FOR THIS FEATURE: 04
Set Length 2
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a
When variable length decoding is enabled, the scanner will
PROGRAMMING BAR CODES
for detailed instructions on setting this feature.
For MSI/Plessey bar codes, all check and data
characters are included in the length calculations.
NOTE
PROGRAMMING BAR CODES
Variable Length Decoding
DEFAULT
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 16
MSI/Plessey
020001(CR)
00CC(CR)
117