Eas Features - Sensormatic; Eas Mode - Datalogic Magellan 8500Xt Product Reference Manual

EAS Features — Sensormatic
NOTE

EAS Mode

NOTE
7-42
These features control the Sensormatic
box. This orderable option is installed at the time of manufacture. See
EAS Features — Checkpoint on page 54
®
point EAS system.
This controls the mode of operation for interfacing with the Sensor-
®
matic AMB-9010 EAS controller box. Choices are:
• Disabled = EAS deactivation turned off.
• Coupled Mode = EAS tag is deactivated only upon successful scan-
ning of an item's barcode or via manual push button.
• Decoupled Mode = EAS deactivation is performed independently of
barcode scanning.
• Hybrid Mode = EAS system is armed whenever the scanner is
enabled and the deactivation beep is sounded when an EAS tag is
deactivated.
• Host Mode = Fundamental controls and notification of various EAS
events are provided to the POS system.
Deactivation can only be initiated manually if the manual EAS deactivation
push button is armed to do so. Reference the feature, Manual EAS Deactiva-
tion Push Button for more information.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You'll need to cover
any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
®
AMB-9010 EAS controller
to set options for the Check-
TM
Magellan 8500Xt Scanner