Related Manuals for Datalogic QuickScan BC2030
Summary of Contents for Datalogic QuickScan BC2030
- Page 1 QuickScan™ QBT2400 General Purpose Handheld Area Imager Bar Code Reader with Bluetooth® Wireless Technology Quick Reference Guide...
- Page 2 Datalogic has taken reasonable measures to provide informa- tion in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
-
Page 3: Table Of Contents
Replacing the Battery Pack ..........11 Using the Quickscan™ QBT2400 ..........13 Linking the Reader ..............14 Link Datalogic RF Devices to Base......14 Linking to a Bluetooth Adapter in Serial Port Profile Mode................14 Linking to a Bluetooth Adapter in HID mode..15 Variable PIN Code ............ - Page 4 FCC RF Radiation Exposure Statement....42 Canadian Notice ..............42 Power Supply ..............43 Imager Labeling ..............43 WEEE Statement ............... 45 Datalogic ADC Limited Factory Warranty ....... 46 Warranty Coverage ..........46 Warranty Claims Process........46 Warranty Exclusions..........47 No Assignment ............48 Risk of Loss ..............
- Page 5 2. Scope Of License Granted. 2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User.
- Page 6 Datalogic or Datalogic's third party licensors and that the Software is protected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic' s or its third party licen- sors' copyrights, patents, trademarks, service marks, trade secrets, or other intel- lectual property rights and End User shall have no right to commence any legal actions to obtain such rights.
- Page 7 Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402. 7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2)
-
Page 8: Software Product Policy
Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing. -
Page 9: Description
QuickScan™ QBT2400 Description With rich feature sets and extensive options, the QuickScan™ product series from Datalogic represents the premium level of data collection equipment for general purpose applications. The QuickScan QBT2400 readers have enhanced optics with improved motion tolerance allowing codes placed on fast... -
Page 10: Setting Up The Reader
Setting Up the Reader Setting Up the Reader Follow the steps below to connect and get your reader up, and communicating with its host. Configure the Base Station starting on this page. Charge the Batteries (see page 8). Link to the Base Station (see page 14). Select the Interface Type (see page 24). - Page 11 Setting Up the Reader Figure 1. Lock lever disengaged Engage the locking mechanism by pushing up the lever as far as it will go. Figure 2. Lever in locked position it is good practice to put the scanner in the locked condition at the end of the working shift, or when not in use for an extended period of time.
-
Page 12: Connecting The Base Station
Connecting the Base Station Connecting the Base Station Figure 3 on page 5 shows how to connect the Base Station to a terminal, PC or other host device. Turn off the host before connection and consult the manual for that equipment (if necessary) before proceeding. - Page 13 Connecting the Base Station After the cables are plugged in, reinsert the Cable Stop- per. Cable Stopper reinserted Connect to an AC Adapter, and plug the AC power cord into the (wall) outlet. Figure 3. Connecting the Base Station Wall plug Connector I/F Cable AC/DC...
-
Page 14: System And Network Layout
Connecting the Base Station Most connections plug directly into the host device as shown Figure 4. Keyboard Wedge interface cables have a ‘Y’ con- nection where its female end mates with the male end of the cable from the keyboard and the remaining e.nd at the key- board port on the terminal/PC. -
Page 15: Using The Bc2030™ Radio Base
Connecting the Base Station Using the BC2030™ Radio Base Radio Base LEDs LEDs on the QuickScan Base provide information about the Base as well as battery charging status, as shown in Figure Figure 6. QuickScan Base LEDs YELLOW LED RED LED / GREEN LED Table 1. -
Page 16: Charging The Batteries
Table 1 on page 7) will indi- cate the status of the battery. Before using the Battery, read “Battery Safety” in the following section. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance. Battery Safety To install, charge and/or perform any other action on the bat- tery, follow the instructions in this manual. - Page 17 40°C) temperature range. CAUTION Use only the authorized power supplies, bat- tery pack, chargers, and docks supplied by your Datalogic reseller. The use of any other power supplies can damage the device and CAUTION void your warranty. Do not disassemble or modify the battery. The...
- Page 18 Connecting the Base Station Do not place the battery in or near fire, on stoves or other high temperature locations. Do not place the battery in direct sunlight, or use or store the battery inside cars in hot CAUTION weather. Doing so may cause the battery to generate heat, explode or ignite.
-
Page 19: Replacing The Battery Pack
China regulatory and other laws and regulations about the environment. Replacing the Battery Pack Before proceeding, read “Battery Safety” on the preceding pages. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance. Using a coin or screwdriver, unscrew the bottom of the battery pack until it is disengaged. - Page 20 Connecting the Base Station Extract the battery pack by slightly rotating the pack and pulling away from the reader. To mount the new battery pack reverse the process: Insert the top of the new pack inside the reader’s han- dle. Rotate the battery pack downward while pressing the bottom side of the battery pack (to seat securely into the contacts springs) so that the edges of the pack and...
-
Page 21: Using The Quickscan™ Qbt2400
LED indicator. Reference the QuickScan Q2400 Product Reference Guide (PRG) on the Datalogic website for more information about this feature and other programmable settings. Quick Reference Guide... -
Page 22: Linking The Reader
Linking the Reader Linking the Reader Link Datalogic RF Devices to Base For RF devices, before configuring the interface it is nec- essary to link the handheld with the base. To link the handheld and the base, press the trigger to wake up the handheld and mount it into the base. -
Page 23: Linking To A Bluetooth Adapter In Hid Mode
Link to PC in HID label below.. Use the host computer’s Bluetooth manager to “Discover new devices” and select "Datalogic Scanner." If you receive an error message, it may be necessary to disable security on the device. Use a text editor to see incoming data on the port designated by the computer's Bluetooth manager.. -
Page 24: Variable Pin Code
Linking the Reader Variable PIN Code Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8) require a Variable PIN Code. When attempting connection, the application presents a window that includes a PIN Code which is to be input using the QBT2400. -
Page 25: Programming
After scanning the interface bar code from the Interfaces section, select other options and customize your reader through use of the programming bar codes avail- able in the Product Reference Guide (PRG) or Datalogic Alad- din™ configuration software (both available on the Datalogic website). -
Page 26: Hid Alt Mode
Programming HID Alt Mode Read the configuration command label below for the HID Alt Mode feature. ENTER/EXIT PROGRAMMING MODE ♦ HID Alt Mode = OFF HID Alt Mode = ON Power Off Scan the bar code below to shut off power to the handheld until the next trigger pull. -
Page 27: Country Mode
Country Mode Country Mode The following bar codes can be used either while in HID mode (when reader is connected using Bluetooth) or for configuring the base. HID configuration: Scan any one of the bar codes in the table the country for which your PC is localized. below to set Base configuration: Only the following interfaces support... - Page 28 Country Mode COUNTRY MODE (continued) Country Mode = Croatia* Country Mode = Czech Republic* Country Mode = Denmark* Country Mode = France Country Mode = French Canadian* Country Mode = Germany *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) QuickScan™...
- Page 29 Country Mode COUNTRY MODE (continued) Country Mode = Hungary* Country Mode = Italy Country Mode = Japanese 106-key* Country Mode = Lithuanian* Country Mode = Norway* Country Mode = Poland* *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) Quick Reference Guide...
- Page 30 Country Mode COUNTRY MODE (continued) Country Mode = Portugal* Country Mode = Romania* Country Mode = Spain Country Mode = Sweden Country Mode = Slovakia* Country Mode = Switzerland* *Supports only the interfaces listed in the Country Mode feature description (Base configuration only) QuickScan™...
-
Page 31: Caps Lock State
Caps Lock State Caps Lock State The following bar codes can be used either while in HID mode (when reader is connected using Bluetooth) or for configuring the base. This option specifies the format in which the reader sends character data. When using the Base Interface, this applies only to keyboard wedge interfaces. -
Page 32: Selecting The Base Interface Type
Selecting the Base Interface Type Selecting the Base Interface Type Upon completing the physical connection between the base and its host, proceed directly to Interface Selection below for information and programming for the interface type the base is connected to (for example: RS-232, Keyboard Wedge, USB, etc.) and scan the appropriate bar code to select your sys- tem’s correct interface type. - Page 33 Select RS232-WN RS-232 for use with OPOS/UPOS/JavaPOS Select RS-232 OPOS USB COM to simulate RS-232 standard interface Select USB-COM-STD a. Download the correct USB COM driver from www.datalogic.com USB-OEM USB-OEM (can be used for OPOS/UPOS/JavaPOS) Select USB-OEM Quick Reference Guide...
-
Page 34: Keyboard Interface
Selecting the Base Interface Type Keyboard Interface Use the programming bar codes to select options for USB Keyboard and Wedge Interfaces. KEYBOARD AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/ Standard Key Encoding Select KBD-AT Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard Select KBD-AT-NK... - Page 35 Selecting the Base Interface Type KEYBOARD (continued) PC/XT w/Standard Key Encoding Select KBD-XT Keyboard Wedge for IBM Terminal 3153 Select KBD-IBM-3153 Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard Select KBD-IBM-M Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard Select KBD-IBM-MB USB Keyboard with alternate key encoding...
-
Page 36: Scancode Tables
Selecting the Base Interface Type KEYBOARD (continued) USB Keyboard for Apple computers Select USB-KBD-APPLE Keyboard Wedge for DIGITAL Terminals VT2xx, VT3xx, VT4xx Select KBD-DIG-VT USB Keyboard with standard key encoding Select USB Keyboard Scancode Tables Reference the QuickScan™ PRG for information about control character emulation which applies to keyboard interfaces. -
Page 37: Numlock
Reading Parameters Numlock This option specifies the setting of the Numbers Lock (Num- lock) key while in keyboard wedge interface. This only applies to alternate key encoding interfaces. It does not apply to USB keyboard. ENTER/EXIT PROGRAMMING MODE Numlock = Numlock key unchanged Numlock = Numlock key toggled Reading Parameters Point the reader at the target and pull the trigger to enable... -
Page 38: Good Read Green Spot Duration
Reading Parameters Good Read Green Spot Duration Successful reading can be signaled by a good read green spot. Use the bar codes below to specify the duration of the good read pointer beam after a good read. ENTER/EXIT PROGRAMMING MODE Green Spot Duration = Disable (Green Spot is Off) ♦... -
Page 39: Scan Modes
Scan Modes Scan Modes The imager can operate in one of several scanning modes. Trigger Single — When the trigger is pulled, scanning is acti- vated until one of the following occurs: • a programmable duration has elapsed • a label has been read •... - Page 40 Scan Modes SCAN MODE ENTER/EXIT PROGRAMMING MODE ♦ Scan Mode = Trigger Single Scan Mode = Trigger Hold Multiple Scan Mode = Trigger Pulse Multiple Scan Mode = Flashing Scan Mode = Always On Scan Mode = Stand Mode QuickScan™ QBT2400...
-
Page 41: Pick Mode
Scan Modes Pick Mode Pick Mode is a Decoding and Transmission process where bar codes that are not within the configurable distance from the center of the aiming pattern are not acknowledged or trans- mitted to the host. It is active only while the scanner is in Trigger Single mode. -
Page 42: Technical Specifications
Technical Specifications Technical Specifications The following table contains Physical and Performance Char- acteristics, User Environment and Regulatory information. Physical Characteristics Color White or Black Height 6.4”/163 mm Dimensions Length 3.6”/91 mm Width 1.6”/41 mm Approximately Weight (without 200 g (reader) cable) 230 g (base charger) Electrical Characteristics... - Page 43 Technical Specifications Performance Characteristics Light Source LEDs Roll (Tilt) Angle Up to ± 180° Pitch Angle ± 40° Skew (Yaw) Angle ± 40° Field of View 40° H x 26° V a. Charge Times are much lower when battery is within daily typical operat- ing condition.
- Page 44 Code 128; Code 128 ISBT; Interleaved 2 of 5; Standard 2 of 5; Inter- leaved 2 of 5 CIP (HR); Industrial 2 of 5; Discrete 2 of 5; Datalogic 2 of 5 (China Post Code/Chinese 2 of 5); IATA 2of5 Air cargo code;...
- Page 45 Technical Specifications User Environment Operating 32° to 122° F (0° to 50° C) Temperature Charging 32° to 104° F (0° to 40° C) Temperature Storage -4° to 158° F (-20° to 70° C) Temperature Operating: 5% to 90% relative humidity, Humidity non-condensing Scanner withstands 18 drops from 1.5 m...
-
Page 46: Led And Beeper Indications
LED and Beeper Indications LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indi- cate various functions or errors on the reader. An optional “Green Spot” also performs useful functions. The following tables list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are program- mable, and so may or may not be turned on. - Page 47 LED and Beeper Indications Indication Description Beeper Upon successful read of a label, the Green Spot software shall turn flashes the green spot on momentarily for the time speci- fied by the config- ured value. Except when in sleep mode or when a Good Read LED Duration other than 00 is selected Programming Mode - The following indications ONLY occur when...
-
Page 48: Error Codes
Error Codes Error Codes Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the sequence will be repeated. The following table describes the LED flashes/beep codes associated with an error found. -
Page 49: Regulatory Information
Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to oper- ate the equipment. Statement of Agency Compliance This device complies with part 15 of the FCC Rules. Operation... -
Page 50: Fcc Rf Radiation Exposure Statement
Regulatory Information FCC RF Radiation Exposure Statement Exposure to Radio-Frequency Radiation CAUTION To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. -
Page 51: Power Supply
Regulatory Information Power Supply This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power directly to the reader or else be supplied by UL Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5-14V mini- mum 900mA, which supplies power directly to the Base/ Charger via the power connector of the Base itself. - Page 52 Regulatory Information China RoHS Table of Restricted Elements QuickScan™ QBT2400...
-
Page 53: Weee Statement
Spanish Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com. Portuguese Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web www.datalogic.com. -
Page 54: Datalogic Adc Limited Factory Warranty
Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to rem- edy any defect covered by this warranty and restore the prod- uct to its normal operating condition. -
Page 55: Warranty Exclusions
Datalogic shall pay for the return of the product to Customer if the shipment is to a loca- tion within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. -
Page 56: No Assignment
No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic. DATALOGIC' S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITA- TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FIT- NESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. -
Page 57: Ergonomic Recommendations
Ergonomic Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury follow the recommenda- tions below. Consult with your local Health & Safety Manager to ensure that you are adhering CAUTION to your company’s safety programs to prevent employee injury. -
Page 58: Cleaning
Cleaning Cleaning Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to ensure best performance during scanning operations. Contacts on the scanner and the base should also be cleaned as needed to ensure a good connection. Be sure to unplug the reader and base before cleaning. -
Page 59: Services And Support
Services and Support Services and Support Datalogic provides several services as well as technical sup- www.datalogic.com port through its website. Log on to click on the links indicated for further information. Products Search through the links to arrive at your product page where Manuals Software &... -
Page 60: Hex-Numeric Keypad
Hex-Numeric Keypad Hex-Numeric Keypad Use the bar codes that follow to enter numbers as you would select digits/characters from a keypad. QuickScan™ QBT2400... - Page 61 Hex-Numeric Keypad Hex-Numeric Keypad (continued) Quick Reference Guide...
-
Page 62: For Hid Variable Pin Code Only
Hex-Numeric Keypad Hex-Numeric Keypad (continued) For HID Variable Pin Code only If you make a mistake, scan the CANCEL barcode below to abort and not save the entry string. You can then restart. Cancel an incomplete HID Variable PIN Code Finish by scanning the Exit HID Variable PIN Code label. - Page 63 La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per: This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for: Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour: Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl...
- Page 64 ©2014 Datalogic ADC, Inc. • All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Datalogic ADC, Inc. 959 Terry Street Eugene |OR 97402 Telephone: (1) 541-683-5700...