Remote Display - Enable/Disable - Datalogic Magellan 8500Xt Product Reference Manual

Remote Display — Enable/Disable
Recalibration/recertification may be required when adding a Remote Display.
Consult your local Weights and Measures authority.

If this feature is enabled the scanner-scale will expect that it is connected to
a Remote Display, and will indicate an error if one is not. See Error Codes
NOTE
in Section 4 for more information.
Product Reference Guide
The scanner-scale can be configured to operate with or without a Remote
Display.
REMOTE DISPLAY = DISABLE
REMOTE DISPLAY = ENABLE
7-37