Remote Display - Enable/Disable - Datalogic MAGELLAN 8200 Product Reference Manual

Remote Display — Enable/Disable
Recalibration/recertification may be required when adding a Remote Display.
Consult your local Weights and Measures authority.
If this feature is enabled the scanner-scale will expect that it is connected to
a Remote Display, and will indicate an error if one is not. See Error Codes
NOTE
in Section 4 for more information.
6-42
The scanner-scale can be configured to operate with or without a Remote
Display.
®
Magellan 8100/8100
REMOTE DISPLAY = DISABLE
REMOTE DISPLAY = ENABLE
Ω
and 8200
/ Ω
8200 Scanner