The Copy Has Image Blur - Canon CLC5000 Service Manual

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

3.4.19 The copy has image blur

1) Generate a test print (PGTYPE-10). Is the image normal?
YES: Go to step 3.
Drive on Printer side
2) Check the following
Drive on Reader
3) Set 'OPT > R-OPT > SCAN-DWN' in service mode.
NO:
5-102
• Is the photosensitive drum drive gear worn?
• Does the flywheel wobble?
• Does the transfer belt have dents or deformation?
Is the problem corrected after the value is set below '1' ?
Check the following.
• Clean the rail of mirror mount.
• Clean the wire of mirror mount.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001