Canon CLC5000 Service Manual page 685

Hide thumbs Also See for CLC5000:

Table of Contents

SERVICE MODE

<P-UP-TMG (pick-up timing adjustment)>

Use it to execute automatic pick-up from the upper/lower cassette, thereby

obtaining the pick-up timing adjustment value.

Be sure to place A4 or LTR paper in the upper and lower cassettes before

executing the operation.

Use it to indicate the data obtained by 'PK-ADJ-U/L/D'.

Use it to indicate the maximum value of the data obtained by 'PK-AJD-U/

D-SEND-U/L/D

Use it to write the obtained data into memory.

Use it to execute skew removing operation twice when pick-up is from the

multifeeder tray (effective only when the paper type is set to 'thickest').

0: Remove skew by registration roller

1: Remove skew by registration roller and feeding roller

Use it if thick paper tends to move askew.

Use it to start automatic pick-up from the paper deck and to obtain the pick-

up timing adjustment value.

This mode is an adjustment mode for LTR paper. As such, be sure to de-

posit LTR paper in the paper deck in advance.

Use the mode if a discrepancy is noted along the leading edges of LTR

2000 2000 2000 2000

CANON CLC5000 REV.0 JAN. 2001

Chapters

Table of Contents

Fy8-13gz-000