Reducing Two, Four, or Eight Originals to Fit on a Single
Copy Sheet (Image Combination)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Image
Combination," on p. 4-32.
IMPORTANT
• Originals copied using the Image Combination mode must all be the same size. You cannot use the
Image Combination mode with the Different Size Originals mode.
• Before scanning the next original (between jobs), you can set or change settings for the number of copy
sets and 2-Sided Original mode.
1
7
2
3
7-64
Process/Layout Settings
Press [Process/Layout]
Specify each setting.
Select the desired image combination type ([2 on 1], [4 on 1], or [8 on 1]).
Press [Option] to select the order of the layout
Press [Select Original Size]
Press [2-Sided Original] to scan two-sided originals
Press [2-Sided Copy] to make two-sided copies
Press [Paper Select]
Press [Done].
[Image Combination].
select the image order.
specify the original size.
select the type of two-sided orientation.
select the paper source.
select the type of 2-sided originals.