Canon CLC5000 Service Manual page 647

SERVICE MODE
MULT-ADJ
Adjusts the image write position in main scanning direction when pick-up
is from the multifeeder. Be sure to select the upper cassette on the User
screen in advance.
Settings range 0 ~ 255 (standard: 128)
A higher value leads to a movement to the rear.
(unit: about 0.06mm)
DECK-ADJ (only if deck is connected)
Adjusts the image write start position in main scanning direction when
pick-up is from the paper deck. Be sure to select the upper cassette on the
User screen in advance.
Settings range 0 ~ 255 (standard: 128)
A higher value leads to a movement to the rear.
(unit: about 0.06mm)
Remarks Indicated only when a deck is connected.
REFE-ADJ
Adjusts the image write start position in main scanning direction for re-pick
up operation.
Settings range 0 ~ 255 (standard: 128)
A higher value leads to a movement to the rear.
(unit: about 0.06mm)
VSYC-ADJ
Adjusts the image write start position in sub scanning direction.
Settings range 0 ~ 255 (standard: 128)
A higher setting will cause a shift toward the rear.
(unit: about 0.11mm)
S-58
COPYRIGHT © 2001 CANON INC.
Feeding
direction
Feeding
direction
Feeding
direction
Feeding
direction
2000 2000 2000 2000
Rear
Image
Front
F00-300-20
Rear
Image
Front
F00-300-21
Rear
Image
Front
F00-300-22
Image
F00-300-23
CANON CLC5000 REV.0 JAN. 2001