Canon CLC5000 Service Manual page 754

Cause The fixing heat discharge fan (FM31) is faulty.
Description
0004 The fixing heat discharge fan (FM31) is faulty.
Cause The delivery cooling fan (FM34) is faulty.
Description
0005 The delivery cooling fan (FM34) has stopped to rotate.
Cause The pre-fixing exhaust fan (FM35/36) is faulty.
Description
0006 The pre-fixing exhaust fan (FM35/36) has stopped to rotate.
E824
Cause The primary exhaust fan (FM6) is faulty.
Description
0001 The primary exhaust fan (FM6) has stopped to rotate.
Cause The primary suction fan (FM8/9) is faulty.
Description
0002 The primary suction fan (FM8/9) has stopped to rotate.
E826
Cause The pickup cooling fan (FM26/32) is fault.
Description
0001 The pickup cooling fan (FM26/32) has stopped to rotate.
1. If the self diagnosis mechanism has been activated, you can reset the ma-
chine by turning its power switch off and then on.
This, however, does not apply to 'E000'; if allowed with the thermistor
out of order, such would heat and damage the fixing roller.
2. If 'E005' (ADD CLEANING BELT) is indicated, replace the cleaning
web and execute 'E005-RLS' of 'FUSER' under 'FUNC' in service
mode.
3. Even after clearing the E indication by turning off the power switch, a
description of the last E indication may be checked using 'JAM/ERROR'
under 'DISPLAY' in service mode.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
ERROR CODE
E-27