Canon CLC5000 Service Manual page 274

5) Remove the three E-rings [8], pulley
[9], parallel pin [10], two bearings [11],
two washers [12], gear [13], and paral-
lel pin [14] (for [13] and [14], bottom
only); then, detach the feed roller (verti-
cal path) [15].
When detaching and attaching
the vertical path guide assembly,
be sure to take care not to dam-
age the reversal plastic sheet.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
[15]
[9]
[8]
[8] [9] [10] [13] [14] [8]
F02-907-14
[12] [8]
[11]
[11] [12]
[8]
[15]
[10] [8] [12] [11]
[12] [11]
2-235