Canon CLC5000 Service Manual page 115

CHAPTER 2 NEW FUNCTIONS
15) Remove the screw [22], and pull out the
fixing [23] at the front.
16) Remove the two screws [24]; then,
while pulling the rear lever [25] in the
direction of the arrow [A], bend the
slave roller assembly [26] in the direc-
tion of the arrow [B].
17) Pull the transfer belt to the front to de-
tach.
During assembly after replacing
the belt, be sure to fit the fixing
while forcing the slave roller
assembly in the direction of the
arrow to eliminate any gap.
2-76
COPYRIGHT © 2001 CANON INC.
F02-405-63
[B]
[26]
[24]
F02-405-64
F02-405-65
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[23]
[22]
[25]
[A]