Transfer Belt Base - Canon CLC5000 Service Manual

CHAPTER 2 NEW FUNCTIONS

4.5.4 Transfer Belt Base

a. Removing the Transfer Cleaning Blade
1) Remove the transfer cleaner unit.
2) Remove the two screws [1], and detach
the scoop-up sheet [2].
3) Remove the two screws [3], and detach
the blade base [4].
Points to Note When Mounting
the Transfer Cleaning Blade As-
sembly
1. But the blade support plate
against the bearing of the
transfer belt shaft from the
rear.
2. After mounting it, push it
two to three times with your
finger to eliminate the dis-
tortion at the tip of the
blade.
2-82
COPYRIGHT © 2001 CANON INC.
[1]
F02-405-77
[3]
[4]
F02-405-78
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[2]