Canon CLC5000 Service Manual page 669

SERVICE MODE
SINIT-C/M/Y/K
Reads the initial value of the SALT signal (SGNL, REF) of the specified
color.
• The value will be indicated on screen 4/4. Record it to the service label.
SINIT-4
Reads the initial value of the SALT signal (SGNL, REF) of four colors (C,
M, Y, K) in sequence.
• The value will be indicated on screen 4/4. Record it to the service label.
STIR-C/M/Y/K
Stirs the starter of the specified color.
STIR-4
Stirs the starters of the four colors.
SPLY-C/M/Y/K
Rotates the cylinder of the developing assembly to supply starter of the
specified color.
IMG-REG
Turns on or off the image position auto correction function.
0: OFF
1: ON
LSNS-KIL
Turns on or off the toner sensor output mode for moving up/down the hop-
per.
0: OFF
1: ON
Remarks Initial: 0
Used only at time of installation.
S-80
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001