Canon CLC5000 Service Manual page 210

c. Removing the Fuse PCB
1) Remove the rear cover (3)
2) Disconnect the connector from the
PCB, and remove the four PCB retain-
ing clips [1]; then, detach the fuse PCB
[2].
d. Removing the Download PCB
1) Open the front cover (left).
2) Slide out the transfer unit.
3) Remove the four screws [1], and detach
the general exhaust fan cover [2] to-
gether with the download cover [3].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
[1]
[2]
[1]
F02-706-26
[2]
[1]
F02-706-27
[1]
[3]
[1]
2-171