Canon CLC5000 Service Manual page 678

DISP COUNTER
ADJUST
FUNC
OPTION
TEST
Entering Backup Data
If you have executed 'RAM-CLR' for the DC controller PCB, use this screen to enter the
data recorded on the service label.
P-TH-1/2
Enters the output characteristics of the paper thickness sensor set at time of
shipment from the factory.
SNSR-RNK
Enters the characteristics of the paper thickness sensor to be installed
newly.
Remarks The values A through E change by toggle operation.
C/Y/K-OFST
Use it to enter the offset value for the image position correction pattern.
POTOFSTC/M/Y/K
Use it to enter the offset value for the potential sensor.
COPYRIGHT © 2001 CANON INC.
<M> <S>
DC-CON 5/5
P-TH-1 P-TH-2
XXXX XXXX
C-OFST Y-OFST
X
POTOFSTC POTOFSTM
XX
F00-400-10
Do not enter any values other than those on the service data sheet.
2000 2000 2000 2000
<R>
READY
K-OFST
X X
POTOFSTY
XX XX
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
<P> <F>
SNSR-RNK
A
POTOFSTK
XX
S-89