Removing The Laser Unit Motor - Canon CLC5000 Service Manual

3.5.2 Removing the Laser Unit Motor

1) Perform laser unit-related preparatory
work. (See the appropriate instructions.)
2) Disconnect the connector (J03) [1] from
the laser scanner motor driver PCB, and
remove the three screws [2] of the laser
scanner motor assembly.
Do not remove the screw used
to hold the lid in place.
3) Route the harness [3] of the connector
removed in step 2) under the laser scan-
ner motor bottom, and disconnect the
connector [5] while lifting the laser
scanner motor [4].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
[2]
F02-305-07
[5]
[3]
F02-305-08
[1]
[4]
2-23