Reducing Two, Four, or Eight Originals to Fit on a Single Copy
Sheet (Image Combination)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Image
Combination(p.4-22)."
Remark
The 2-Sided Original mode is available only if the
optional Feeder (DADF-U1) is attached
(standard-equipped for the iR3245N/iR3235N/
iR3225N).
Originals copied using the Image Combination mode
must all be the same size. You cannot use the Image
Combination mode with the Different Size Originals
mode.
1. Press [Process/Layout] → [Image Combination].
2. Specify each setting.
Select the desired image combination type ([2 on 1], [4 on 1], or [8 on 1]).
Press [Option] to select the order of the layout → select the image order.
Press [Select Original Size] → specify the original size.
Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Combination)
Before scanning the next original (between jobs), you
can set or change settings for the number of copy sets
and 2-Sided Original mode.
7
7-81