Canon CLC5000 Service Manual page 278

e. Removing the Feed roller (reversal confluence)
1) Remove the rear cover.
2) Remove heater reversal inlet roller. (See
d. above.)
3) Remove the tension spring [1], and re-
move the four screws [2]; then, detach
the buffer pass motor [3] together with
its mounting base.
4) Open the front cover.
5) Pull the retaining handle to the front,
and push up the retaining unit. (See
F02-907-17.)
6) Remove the E-ring [4], washer [5], and
bearing [6] at the front.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[2]
F02-907-21
[4]
[5]
F02-907-22
[3]
[1]
[6]
2-239