Removing The Re-Pickup Assembly - Canon CLC5000 Service Manual

CHAPTER 2 NEW FUNCTIONS

5.7.3 Removing the Re-Pickup Assembly

1) Remove the right cover. (See F02-507-
02.)
2) Remove the screw [1] at the rear, and
detach the connector cover [2].
3) Disconnect the two connectors [3], and
remove the two screws [4] at the front
and the two screws [5] at the rear; then,
detach the re-pickup assembly [6].
2-108
COPYRIGHT © 2001 CANON INC.
F02-507-06
F02-507-07
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[2]
[1]