Canon CLC5000 Service Manual page 413

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
The settings on the screens of service mode are cleared when the RAM on the
reader controller PCB is initialized.
ADJUST
OPTION
The settings on the screens of service mode are cleared when the RAM on the
DC controller PCB is initialized.
ADJUST
FUNC
OPTION
Service Mode Settings Related to the DC Controller PCB
ADJUST
FUNC
OPTION
5-56
Settings on ADJ-XY screen
Settings on DOC-REC screen
Settings on PROJ screen
Settings on ED/RF screen
Settings on COL-ADJ screen
Settings on ADJ-MISC screen
Settings on PRJ-ADJ screen
Settings on P-OPT screen
Settings on ON-SET on P-OPT screen
Settings on REMOTE screen
Settings on DECK screen
Settings on PASCAL screen
Settings on FEED-ADJ screen
Settings on ENV-SET screen
Settings on HV-TR C/M/Y/K screen
Settings on HV-SP screen
Settings on HV-FS screen
Settings on HV-EL screen
Settings on DC-CON screen
Settings on P-UP-TMG screen
Settings on P-THICK screen
Settings on IMG-REG screen
Settings on FUSER screen
Settings on P-OPT screen (except ON-SET)
Settings on PASCAL screen
Settings on FEED-ADJ screen
Settings on ENV-SET screen
Settings on HV-TR C/M/Y/K screen
Settings on HV-SP screen
Settings on HV-FS screen
Settings on HV-EL screen
Settings on DC-CON screen
Settings on P-UP-TMG screen
Settings on P-THICK screen
Settings on IMG-REG screen
Settings on FUSER screen
Settings on P-OPT screen (except ON-SET)
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001